|
However good an automatic pool cleaner is, remember it was developed to assist you with the maintenance of your swimming pool. In turn, from time to time, it may need a little help from you...
Here's what you can do to help:
- Thoroughly clean the weir basket, pump strainer basket, cartridge filter, skim filter and sand filter (whichever is applicable) on a regular basis to ensure optimum pool cleaner efficiency. N.B. ALWAYS disconnect the hose from the weir or vacuum line BEFORE backwashing your filter.
- Always store hoses in a straight line (i.e. never leave hose coiled or in direct sunlight).
-
Periodically inspect parts for wear. The flexi-foot, disc and deflector wheel are the most critical. As the disc wears, it begins to curl at the outer edges. When the depth of the channels between the treads on the flexi-foot is 3mm or less, replace the flexi-foot.
-
In the event of an object becoming stuck in the diaphragm, remove the diaphragm from the pool cleaner before attempting to remove the obstruction. Do not use any sharp objects to remove the debris as this may damage the diaphragm.
IMPORTANT:
Sunlight (ultraviolet rays), water and swimming pool chemicals can take their toll on your automatic pool cleaner. To extend the lifespan of your automatic pool cleaner and hose:
-
Ensure that your pH level is between 7,2 and 7,6 at all times, as recommended. A low pH level is detrimental to most types of plastics and rubbers and will seriously damage your automatic pool cleaner.
-
Remove your automatic pool cleaner from the pool before chemical 'shock' treatments, and only reinstall it after a minimum of four hours.
-
NOTE: Due to the harsh environment in which your pool cleaner operates, your automatic pool cleaner may discolour during normal use over a period of time - this however will not affect the cleaning performance of your unit.
RECOMMENDED WATER BALANCE:
-
CHLORINE
-
pH LEVEL
-
Fibreglass Pools : 7,0 - 7,2
-
Marbelite Pools : 7,2 - 7,6
-
TOTAL ALKALINITY
(Image source: IDSA.org)
|
